Solar panel installation

Switch to solar panels – it’s easier and more rewarding than ever.

GET A QUOTE →

News & guides

Read our latest news and guides.

CONTACT US →

Our partners

We’re proud to partner with trusted brands, ensuring our customers get the very best in renewable technology.

→

Do Air Source Heat Pumps Work in Old Houses?

Yes, air source heat pumps do work in old houses, including Victorian terraces, Edwardian semis, 1930s homes and stone cottages. A heat pump simply needs to be sized to match how much heat your home loses, and in some cases paired with a few sensible upgrades such as extra loft insulation or one or two larger radiators. 

Done properly, it can keep an older home just as warm as a gas boiler, with lower carbon emissions and, in many cases, lower bills.

At EE Renewables Ltd, a large share of the homes we work on were built well before the Second World War, from London townhouses to Bristol terraces and Welsh valley cottages. We know older properties come with their own quirks. 

This guide explains how heat pumps perform in period homes, what challenges to plan for, what it costs and what support is available, so you can make a confident decision about your own property.

Can You Install an Air Source Heat Pump in an Old House?

Yes, you can install an air source heat pump in an old house, and thousands of UK homeowners already have. Age alone does not rule a property out. What matters is how much heat the house loses and whether the heating system is designed to replace that heat at the lower temperatures a heat pump runs at.

The most convincing proof comes from the Government funded Electrification of Heat Demonstration project, run by the Energy Systems Catapult between 2020 and 2023. It installed heat pumps in around 750 homes across Britain, including many Victorian and Edwardian properties. The project concluded that there was no type or age of home that could not have a heat pump installed successfully.

It also helps to remember how heat pumps are used abroad. Countries such as Norway, Sweden and Switzerland have plenty of old, draughty buildings too, yet heat pumps are the most common way of heating homes there. A well designed system works in an old house for the same reason it works in a new one: it moves heat from outside to inside very efficiently.

The key difference is planning. An older home usually needs a more careful survey and, sometimes, a slightly larger heat pump or a few radiator upgrades. Skip those steps and you risk a system that struggles. Get them right and the house will feel warm and comfortable all winter.

What Counts as an Old House for a Heat Pump?

An old house, for heat pump purposes, is usually any home built before around 1945, although many homes built up to the 1970s share similar features such as little or no wall insulation. The UK has some of the oldest housing in Europe. 

According to the English Housing Survey, roughly one in five homes in England was built before 1919, and that share is even higher in cities such as London, Bath and Bristol.

Here are the main types of older property we see across Southern England, the South West and South Wales:

Victorian and Edwardian Terraces

Victorian and Edwardian terraces, built between roughly 1837 and 1914, are common across London, Brighton, Southampton, Bristol and Cardiff. They usually have solid brick walls, high ceilings, sash windows and suspended timber floors. The good news is that terraces share walls with their neighbours, which reduces heat loss compared with a detached house.

1920s and 1930s Semis

1920s and 1930s semi detached homes are found in suburbs from Oxford to Reading and across outer London. Many were built with early cavity walls, which can often be filled with insulation. That makes them some of the easiest older homes to fit with a heat pump.

Stone Cottages and Rural Homes

Stone cottages and rural homes are common in the Cotswolds, Somerset, Devon, Cornwall and the Welsh valleys. They often have thick solid stone walls, small windows and older heating such as oil, LPG or storage heaters. Because these homes are often off the gas grid, switching to a heat pump can bring some of the biggest savings of all.

Georgian and Regency Townhouses

Georgian and Regency townhouses, found in Bath, Brighton, Bristol’s Clifton and central London, tend to be larger, with tall rooms and big windows. They can absolutely work with a heat pump, but they need careful design and often fall within conservation areas or are listed buildings.

What Challenges Do Old Houses Present for Air Source Heat Pumps?

The challenges old houses present for air source heat pumps mostly come down to higher heat loss, smaller radiators and older pipework. None of these are deal breakers, but each needs to be considered at the design stage.

Higher Heat Loss

Higher heat loss is the biggest difference between old and new homes. Solid walls, single glazing, open chimneys and gaps around floorboards all let warmth escape faster. A typical solid wall loses around twice as much heat as an insulated cavity wall. This does not stop a heat pump working, but it means the system needs to be big enough to keep up on the coldest days.

Radiators Sized for Hot Boilers

Radiators in older homes were usually sized for a gas or oil boiler running at around 70°C to 80°C. A heat pump runs most efficiently at 35°C to 55°C, so the same radiator gives out less heat. Some rooms may need a larger radiator to stay comfortable, especially those with big windows or several outside walls.

Older Pipework

Older pipework, particularly very narrow “microbore” pipes fitted in the 1970s and 1980s, can sometimes restrict the amount of water a heat pump needs to move around the house. Your installer will check the pipe sizes and may recommend replacing short sections.

Space for the Equipment

Space for the equipment can be tight in period homes. You will need room outside for the heat pump unit, often in a back garden, side return or yard, and room inside for a hot water cylinder. Many older homes already have an airing cupboard that can be reused.

Own an older home and want to know if a heat pump will work? EE Renewables provides expert air source heat pump installation across Southern England, Greater London, South West England and South Wales, including London, Brighton, Oxford, Southampton, Bristol and Cardiff. Get in touch today for a free air source heat pump quote tailored to your location, and we will assess exactly what your property needs.

How Do You Make an Air Source Heat Pump Work Well in an Old House?

You make an air source heat pump work well in an old house by starting with an accurate heat loss survey, tackling the easiest insulation wins, upgrading the radiators that need it and choosing the right type of heat pump. You do not need to turn your home into a modern eco house first.

Start With a Room by Room Heat Loss Survey

A room by room heat loss survey is the single most important step. Your installer measures each room, checks the walls, windows, floors and roof, and calculates how much heat is needed on the coldest day of the year. This tells you the right size of heat pump and which radiators, if any, need changing. MCS rules require this calculation, so never accept a quote without one.

Tackle the Easy Insulation Wins

The easy insulation wins in older homes are often cheap and quick, and they reduce the size of heat pump you need. Focus on these first:

  • Topping up loft insulation to around 270mm
  • Draught proofing doors, sash windows and floorboards
  • Fitting a chimney balloon or draught excluder in unused fireplaces
  • Insulating under suspended timber floors where accessible
  • Adding secondary glazing, which suits listed and period windows

Solid wall insulation can make a big difference too, but it is more expensive and not always necessary.

Upgrade the Radiators That Need It

Upgrading radiators usually means swapping a handful of them for larger or double panel models, or for low temperature radiators designed for heat pumps. In many older homes, only two to four radiators need changing. Traditional style column radiators are available if you want to keep a period look.

Choose the Right Type of Heat Pump

Choosing the right type of heat pump matters more in an older home. High temperature air source heat pumps, such as models using R290 refrigerant, can produce water at 70°C to 75°C. That makes them better at working with existing radiators, although they are slightly less efficient at those higher temperatures.

Use Smart Controls and Weather Compensation

Smart controls and weather compensation help an older home stay comfortable while keeping bills down. Weather compensation automatically adjusts the water temperature depending on how cold it is outside, so the heat pump only works as hard as it needs to.

Typical Upgrade Costs for Older Homes

UpgradeTypical costImpact on heat pump performance
Loft insulation top up£500 to £1,500High, quick win
Draught proofing£200 to £1,000Medium, very cost effective
Cavity wall insulation£1,000 to £3,000High, where cavities exist
Underfloor insulation (suspended timber)£1,000 to £3,000Medium
Larger radiators (per radiator, fitted)£300 to £800High in cold rooms
Secondary glazing (per window)£300 to £1,000Medium
Internal solid wall insulation£8,000 to £15,000High, but costly
External solid wall insulation£10,000 to £20,000High, but costly

Costs are approximate and vary with the size of your home and the work involved.

How Well Do Air Source Heat Pumps Perform in Old Houses?

Air source heat pumps perform well in old houses when they are designed correctly, often matching the efficiency seen in much newer homes. The Electrification of Heat Demonstration project found that older properties, including pre 1919 homes, achieved similar efficiency to newer ones. In other words, the age of the house mattered much less than the quality of the design and installation.

In that project, air source heat pumps achieved an average seasonal efficiency of around 2.8, meaning they produced nearly 3 units of heat for every unit of electricity. The best performing systems reached well above 3.5. By comparison, a modern gas boiler converts around 90% of its fuel into heat, so even an average heat pump is roughly three times as efficient.

The mild climate in our region helps as well. Winters in London, Brighton, Southampton, Bristol and Cardiff are among the gentlest in the UK, with average January temperatures usually between 4°C and 8°C. Air source heat pumps work more efficiently when the outside air is milder, which gives older homes in the south a real advantage.

Comfort in Older Homes

Comfort in older homes often improves after a heat pump is fitted. Instead of short, hot blasts from a boiler, a heat pump runs gently for longer, keeping rooms at a steady temperature. Many owners of period homes tell us their house feels more evenly warm, with fewer cold corners, than it ever did with a boiler.

How Much Does It Cost to Install an Air Source Heat Pump in an Old House?

The cost to install an air source heat pump in an old house is usually between £9,000 and £16,000 before grants, slightly more than a typical modern home. The extra cost comes from needing a larger heat pump, more radiator upgrades or some pipework changes. With the £7,500 Boiler Upgrade Scheme grant, many owners of older homes pay between roughly £1,500 and £8,500.

Property typeTypical heat pump sizeTypical installed cost (before grant)
Two bedroom Victorian terrace5kW to 7kW£9,000 to £12,000
Three bedroom 1930s semi6kW to 9kW£9,500 to £13,000
Three or four bedroom Edwardian semi8kW to 12kW£11,000 to £15,000
Detached stone cottage (off gas grid)8kW to 14kW£12,000 to £16,000

Figures are approximate and depend on your home’s heat loss, layout and the work needed.

Running Costs in Older Homes

Running costs in older homes depend on how much heat the house loses and which energy tariff you use. Compared with a gas boiler, a well designed heat pump on a heat pump friendly or time of use tariff can be cheaper to run. Compared with oil, LPG or electric storage heaters, which are common in rural parts of Somerset, Devon, Dorset and South Wales, the savings are often significant.

Every bit of insulation you add lowers your running costs further, which is why simple upgrades like loft insulation and draught proofing pay for themselves so quickly in older properties.

Can Landlords Install Air Source Heat Pumps in Older Rental Properties?

Landlords can install air source heat pumps in older rental properties, and it is one of the most effective ways to lift a low EPC rating. Many pre-war rental homes currently sit in EPC bands D or E, mainly because of solid walls and older heating systems.

The Government has set out plans for privately rented homes in England and Wales to reach EPC band C by 2030. For landlords with Victorian flats in London, student lets in Oxford, Bristol or Cardiff, or period houses in Brighton, a heat pump combined with simple insulation upgrades can make a real difference to that rating.

There are practical benefits too:

  • Grant support: Landlords can claim the £7,500 Boiler Upgrade Scheme grant on rental properties.
  • Lower maintenance: No combustion means no carbon monoxide risk from the heating system and just a routine yearly service.
  • Steady comfort: Tenants in older homes often notice warmer, more even heating, which can mean fewer complaints and longer tenancies.
  • Future proofing: Moving away from gas now avoids a rushed upgrade later if rules tighten further.

If you manage converted flats in an older building, you may also need permission from the freeholder before fitting an outdoor unit.

Do You Need Planning Permission for a Heat Pump on an Old House?

You usually do not need planning permission for a heat pump on an old house in England, because most installations count as permitted development. The rules are different, however, if your home is listed or sits in a conservation area, and the rules in Wales differ slightly from those in England.

Permitted Development Rules

Permitted development rules in England allow you to install an air source heat pump without a full planning application, as long as it meets certain conditions. These include staying within noise limits, which means no more than 42 decibels at the nearest neighbouring window, and following size and positioning limits. 

In Wales, separate permitted development rules apply, including stricter distance requirements from the property boundary, so it is worth checking with your installer or local council.

Listed Buildings

Listed buildings always need listed building consent before you fit a heat pump, even if the work would normally be permitted development. There are around 400,000 listed building entries in England alone, many of them homes. Councils will look at where the outdoor unit goes, how pipes enter the building and whether any original features are affected. Discreet placement, for example in a rear courtyard, makes approval much more likely.

Conservation Areas

Conservation areas cover large parts of cities such as Bath, Brighton, Oxford, Bristol and London. Rules here are tighter, especially for units that face a road or are visible from public spaces. A heat pump placed at the back or side of the property, out of view from the street, is often still allowed without a full planning application, but always check with your local planning authority first.

At EE Renewables, we regularly work on homes in conservation areas and can advise on the best position for your heat pump.

What Grants Are Available for Heat Pumps in Old Houses?

The main grant available for heat pumps in old houses is the Boiler Upgrade Scheme, which gives £7,500 off the cost of an air source heat pump in England and Wales. There is no age limit on the property, so Victorian, Edwardian and even older homes all qualify, as long as they meet the scheme rules.

To be eligible, you will generally need to:

  • Own the property, as a homeowner or landlord
  • Live in England or Wales
  • Be replacing a fossil fuel system such as gas, oil or LPG, or certain electric heating
  • Have a valid EPC with no outstanding recommendations for loft or cavity wall insulation, unless an exemption applies
  • Use an MCS certified installer

The insulation rule is important for older homes. If your EPC recommends loft or cavity wall insulation, you will usually need to have it done before claiming the grant. Solid wall insulation is not a requirement.

Other support worth knowing about includes:

  • 0% VAT on heat pump and insulation installations in Great Britain until 31 March 2027
  • Warm Homes Nest scheme in Wales, offering free energy saving improvements to eligible low income households
  • ECO4 and local council schemes, which can help some households with insulation and heating upgrades

Scheme rules and budgets change, so always check the latest guidance. EE Renewables handles the Boiler Upgrade Scheme application for every eligible customer.

Ready for a Free Air Source Heat Pump Quote for Your Older Home?

Considering an air source heat pump for an older property? EE Renewables Ltd offers free, no-obligation heat pump quotes to help you understand the installation costs, assess your home’s heating requirements and find a system suited to its age, layout and insulation. Our team can identify whether improvements to your radiators or insulation may be needed and help you explore the potential running costs and energy savings.

Request your free air source heat pump quote today and discover how a heat pump could provide efficient, reliable heating for your older home.

We provide expert air source heat pump installation across Southern England, Greater London, South West England and South Wales, including London, Brighton, Oxford, Southampton, Bristol, Cardiff and surrounding towns and villages.

Whether you own a Victorian terrace, a 1930s semi-detached house, a stone cottage or a Georgian townhouse, our experienced team can help you explore suitable heating solutions without compromising your property’s character.

Frequently Asked Questions

Can a Heat Pump Work With Cast Iron Radiators?

A heat pump can work with cast iron radiators, and they are often well suited to it. Cast iron radiators hold heat for a long time and release it slowly, which matches the gentle, steady way a heat pump runs. Large cast iron column radiators can give out plenty of warmth at lower temperatures, though very small ones may still need upgrading.

Will a Heat Pump Help With Damp in an Old House?

A heat pump can help reduce condensation and damp in an old house by keeping rooms at a steady, even temperature. Cold walls are where condensation forms, so constant gentle warmth makes it less likely. However, a heat pump will not fix damp caused by leaks, rising damp or poor ventilation, so those issues should be sorted out separately.

Can a Heat Pump Heat Rooms With High Ceilings?

A heat pump can heat rooms with high ceilings, as long as the heat loss survey accounts for the extra volume of air. Tall Victorian and Georgian rooms need more heat, so your installer may recommend larger radiators in those rooms. Running the heat pump steadily also helps stop warm air collecting near the ceiling.

Should You Leave a Heat Pump On All Day in an Old House?

You should usually leave a heat pump on all day in an old house, keeping a steady temperature rather than switching it on and off. Older homes with thick walls take a long time to warm up from cold, so letting them cool down overnight makes the system work much harder in the morning. A small drop in temperature at night is fine.

How Long Does It Take to Install a Heat Pump in an Old House?

Installing a heat pump in an old house usually takes three to seven working days, depending on how many radiators and pipes need changing. A straightforward swap may be finished in under a week, while homes needing several radiator upgrades or a new cylinder location can take a little longer. Most homes keep some hot water for much of the work.

Richard Turpin | Sales Manager
richard.turpin@eerenewables.co.uk